Does your love for electronics result in you living in a jungle of cords? The process of figuring out how to hide cables of your TV from a mount for the wall could be a huge headache for many, so through this article, we will tell you how to do that.
Some sleep in the night contemplating, “How do you hide TV wires from the wall?” But, before you give up and choose to accept the frustration of having a plethora of unattractive wires that ruin your TV-watching experience, we’ll be sure that it’s not all that complicated, and there are fairly simple solutions!
Here are some ways how you can hide cables mounted on a wall
Use hooks behind your furniture to hide TV wires
A DIY hack that you can do to eliminate all those wires hanging from your wall-mounted TV is to utilize plastic hooks and pegs. They are readily available at hardware stores or on the internet, and all you need to do is to attach them to the back edges of your furniture and attach cables to the hooks.
Once the cords are hooked in, they will seamlessly hide behind the silhouette of your furniture. Simply press each clip in place for around 30 seconds or so, and let the adhesive rest and stick to your furniture for about half an hour; then, it should be sticky enough to hold the weight of the wires.
This method of hiding cables isn’t just useful when you need to conceal TV cables; it can also be helpful when you have to arrange cables and cords on your desk at work.
The only drawback to this method is that it’s not permanent, as hooks will require replacement periodically. Additionally, this method only works if there is an item of furniture directly below the wall-mounted TV. If you do, you already have an inbuilt solution for hiding TV cables.
Use cord covers to hide TV wires.
An effective method to conceal tv cables can be to cover the cords with plastic that connects straight to the walls over it and will conceal the wires.
They can be purchased from the internet or at the hardware store in your area. In order to successfully cover TV wires, first, we need to measure the distance between the wall between the base of the screen and the floor.
This represents the length of wire you have to conceal, and you can cut your card cover to fit the measurement. After you’ve finished, connect the base of your raceway to the wall using screws, and then snap the cover into place. Ensure you’re equipped with the equipment needed to complete the task, including an electric hacksaw, screws, and screwdriver. It is also possible to purchase paint that’s identical to your walls and then paint the covers of your cords for a seamless look.
Utilizing this method is labor-intensive and requires some basic carpentry skills. Additionally, this procedure’s performance depends on how you do it. In the end, if you place the cord cover is not done properly, it can cause eye strain and distracting factors that could reduce the enjoyment you get from your home. If you plan to go down this path, ensure you’ve done your research!
Hide TV wires behind the wall
This solution is even more intense than the previous one, but it is a sure-shot way of getting your TV cables out of sight and out of mind for the better! You can conceal the wires behind the wall where the TV is mounted with recessed cables.
You’ll need a stud finder, a knife for utility, and some clever fingerwork. The first step is to remove the television from its wall. Use the stud finder to find two panels without studs in the wall. One of these should be behind where the screen ideally sits, and the other should be near the bottom of the wall/near the closest outlet.
Once you’ve found these spot areas, use your knife to cut a hole in each of them large enough to accommodate two cable plates and feed the TV cables into as well out. After you’ve finished, you’re all set with a surprisingly “wireless” living room entertainment system that will impress your family and friends!
There are some disadvantages to this approach, however. It takes a lot of skill and effort to master this technique. Furthermore, this technique is fairly permanent, which means it’s not the best choice for renters living in homes as it could cause harm to your wall. Consider this choice carefully.
